COB LED Display 600×337.5mm
COB LED display cabinet, 600×337.5mm, flip-chip real-pixel technology. Five pixel pitches (P0.78 to P1.87), 600 cd/m² brightness, 3840Hz refresh rate. Indoor use only.
No visible pixels.
Just the image.
COB LED display technology from Dison Europe replaces individually visible LED packages with a continuous, resin-embedded pixel surface — flip-chip COB construction built for close-viewing environments where image continuity matters as much as resolution. The 600×337.5mm Real Pixel Series is available in five pixel pitches, from the ultra-fine P0.78 to the more cost-efficient P1.87.
Every pitch shares the same 600×337.5mm die-casting aluminium cabinet, full front-service maintenance and calibrated 600 cd/m² brightness — so integrators standardise on one mechanical platform and choose resolution project by project, without redesigning the install.
Full technical profile.
Choose your pitch.
| Model No. | HSP07 | HSP09 | HSP12 | HSP15 | HSP18 |
|---|---|---|---|---|---|
| Pixel Pitch | P0.78 | P0.93 | P1.25 | P1.56 | P1.87 |
| Panel Resolution | 768×432 | 640×360 | 480×270 | 384×216 | 320×180 |
| Pixel Density (per m²) | 1,638,400 | 1,137,777 | 640,000 | 409,600 | 284,444 |
| Max Power (per m²) | 370 W | 370 W | 350 W | 350 W | 330 W |
| Average Power (per m²) | 110 W | 110 W | 100 W | 100 W | 90 W |
| Receiving Card | A8S Pro | A7S Plus | A5S Plus | A5S Plus | A5S Plus |
| Packaging technology | Flip Chip COB |
| Display type | Real Pixel Display, 1R1G1B 3-in-1 |
| Brightness (calibrated) | 600 cd/m² |
| Brightness uniformity | 97% or higher, after calibration |
| Refresh rate | 3840 Hz |
| Grayscale | 14-bit |
| Colour temperature | 3000K to 15000K, adjustable |
| Viewing angle (H/V) | 175 degrees or more |
| Contrast ratio | 15,000 to 1 |
| Panel size | 600 × 337.5 × 35.5 mm |
| Panel weight | 4 kg, with module |
| Panel flatness | Less than 0.1 mm |
| Surface | Matte, hardness 4H |
| Protection grade | Front IP54, rear IP43 |
| Installation & maintenance | Full front service |
| Input voltage | AC 100–240V |
| Working temp. / humidity | -10°C to +40°C, 10–90% RH |
| Storage temp. / humidity | -20°C to +60°C, 10–80% RH |
Built for rooms
where distance is short.
The seamless COB surface and fine pixel pitches (P0.78–P1.25) keep dense data walls readable at close range, without a visible dot structure breaking up the image.
3840Hz refresh rate and a wide adjustable colour temperature range keep the panel flicker-free and colour-consistent on camera, not just to the naked eye.
A matte, anti-glare surface and 175-degree viewing angle suit boardrooms, lobbies and briefing rooms where the screen is viewed from every seat, not just head-on.
Coarser pitches (P1.56–P1.87) bring the same seamless COB finish to larger in-store displays viewed from a few metres away, at a lower cost per square metre.
Technical questions from integrators and AV professionals.
COB (Chip on Board) means the LED chips are mounted and sealed directly onto the circuit board and embedded in resin, rather than packaged individually like standard SMD LEDs. Flip-chip is the chip-mounting method used, which improves heat dissipation and durability. The result is a continuous, matte surface with no visible gaps between pixels.
Pixel pitch is the distance between LED clusters — the smaller the number, the closer you can stand to the screen before individual pixels become visible. P0.78/P0.93 suit close-range control rooms; P1.25/P1.56 suit meeting rooms and studios; P1.87 suits larger displays viewed from further away.
It means each physical LED cluster corresponds to one real image pixel, with no software-driven pixel-sharing or virtual-pixel technique used to simulate a finer resolution. What you see in the resolution table is the true, physical pixel count.
A low refresh rate can cause visible flicker or banding when a screen is filmed or photographed. At 3840Hz, the panel updates fast enough to stay flicker-free on camera, which matters for broadcast studios, video conferencing backdrops and any filmed environment.
No — it's rated front IP54, rear IP43, for indoor use only. The front rating tolerates light water spraying (occasional cleaning splashes), but the panel is not designed for outdoor weather exposure.
Every LED module can be removed and replaced from the front of the screen using a suction-cup tool, without accessing the back of the display. This matters for flush-mounted walls or installations with no rear clearance.
Fast delivery
across Europe and MENA.
DHL Express · FedEx International
Door-to-door tracked delivery in 4–10 working days. Full insurance and real-time tracking included. Rapid customs clearance for non-EU destinations.
Sea Freight · Rail Transport
For large-volume B2B orders with scheduled departures and optimised costs. Recommended for distributors and projects requiring phased delivery.
