TB60 LED Media Player
TB60 LED Media Player: a NovaStar controller for LED walls up to 2,300,000 pixels. It offers 4K@60Hz decoding, four Gigabit Ethernet ports configurable as 2+2, custom resolutions up to a 153 MHz pixel clock and Android 11. Built for the largest commercial LED walls.
2,300,000 px
Max pixel capacity
4K@60Hz
Video decoding
4 GbE
Gigabit Ethernet ports
IP20
Ingress protection
Maximum capacity.
Maximum network reach.
Four Gigabit Ethernet ports, configurable as 2+2, for the largest LED walls.
Technical specifications
|
Performance |
Value |
Hardware & power |
Value |
|---|---|---|---|
|
Processor |
ARM Cortex-A55 quad-core, 1.8GHz |
Max pixel clock |
153 MHz |
|
RAM / Storage |
1 GB / 32 GB |
Dimensions |
274.3 × 139.0 × 40.0 mm |
|
Max pixel capacity |
2,300,000 px |
Net weight |
1230.4 g |
|
Max resolution |
4096×4096 px (custom resolutions supported) |
Power input |
AC 100–240V, 50/60Hz, 0.6A |
|
Video decoding |
H.264/H.265, 4K@60Hz |
Max power consumption |
18 W (25 W PSU recommended) |
|
Connectivity |
4×GbE (2+2 configurable), HDMI 1.3 (shared in/out), USB 3.0, USB-B, Wi-Fi AP+Station |
Storage temperature |
-40°C to +80°C |
|
Operating system |
Android 11.0 |
Ingress protection |
IP20 (indoor use) |
TB60 LED Media Player for LED Walls Up to 2,300,000 Pixels
The TB60 LED Media Player is a NovaStar controller that plays and manages content on LED displays and LED walls of up to 2,300,000 pixels, the highest pixel capacity in the TB series. It decodes H.264/H.265 video at 4K@60Hz and offers four Gigabit Ethernet ports, configurable as 2+2.
It is built to drive the largest full-colour LED walls from a single unit. A 153 MHz maximum pixel clock and support for custom resolutions make it suited to non-standard aspect ratios and unusually shaped displays. A shared HDMI 1.3 connector works as an input for live feeds or as an output for monitoring.
Key benefits of the TB60 LED Media Player
2,300,000 pixel capacity
The highest capacity in the TB series, against 1,300,000 on the TB50, drives the largest LED walls in the range from a single controller.
Four configurable Gigabit ports
Four Gigabit Ethernet ports, configurable as 2+2, let installers split large walls across several network segments or set up redundancy.
Non-standard resolution support
A 153 MHz maximum pixel clock and support for custom resolutions make the TB60 suited to unusually shaped or non-rectangular display configurations.
HDMI input or output
A shared HDMI 1.3 connector runs as an input for synchronous live feeds or as an output for monitoring, configured to the installation.
Ready-to-install kit
It ships with a Wi-Fi antenna, AC power cable, quick-start guide and approval certificate, so no separate accessory order is needed to get a unit running on site.
Applications for the TB60 LED Media Player
Large-format commercial walls
The highest pixel capacity in the TB series, paired with four configurable Gigabit ports, drives the largest fixed commercial LED walls from a single controller.
Custom and non-standard displays
Support for non-standard resolutions and a 153 MHz pixel clock make the TB60 a fit for unusually shaped signage and architectural installations.
Retail chains and point of sale
Cloud publishing rolls out promotional content across every store from a single dashboard, with network redundancy for unattended operation.
Smart city and advertising
4K decoding and multi-port networking keep street pole displays and advertising players running smooth content around the clock.
Certification and support
The TB60 LED Media Player is CE and RoHS certified for sale and use in the EU. It comes with a standard 2-year warranty, extendable to 5 years, and technical support managed directly from Italy. Compare it with the TB10 Plus, TB20 Plus, TB30 and TB50, or request information for your project.
TB60 LED Media Player FAQ
The TB60 has a pixel capacity of 2,300,000 against 1,300,000 on the TB50, and four Gigabit Ethernet ports instead of two. The trade-off is HDMI: the TB50 has separate input and output ports usable at the same time, while the TB60 has one HDMI 1.3 connector shared between input and output, one or the other and not both at once.
They can run as 2+2: two pairs serving different sections of a wall or two separate network segments, so installers can match the port setup to the layout of the project.
The TB60 is not limited to standard rectangular resolutions. Combined with its 153 MHz maximum pixel clock, it can drive custom or irregularly shaped display configurations.
Every TB60 ships with a Wi-Fi antenna, an AC power cable, a quick-start guide and an approval certificate.
Three: NTP over a standard internet connection, GPS sync (via an optional 4G/5G module) and RF sync (via a dedicated RF module).
Not on its own: it is rated IP20, for indoor use only. For outdoor deployments, house the unit in a sealed, weatherproof enclosure rated for outdoor use.
The TB60 is CE and RoHS certified for sale and use within the EU. It has a standard 2-year warranty, extendable to 5 years, with technical support managed directly from Italy.
AC 100 to 240V, 50/60Hz, with a maximum draw of 18W (a 25W-rated power source is recommended). No external DC adapter is required.
Up to 2,300,000 pixels per unit, with a maximum resolution of 4096×4096 px and support for custom resolutions.
The single HDMI 1.3 connector works either as an input, for a live feed in synchronous mode, or as an output, for monitoring. It cannot do both at the same time.
Pre-sales and after-sales support
Personalized consulting
Needs analysis and technical support for every project.
Regulatory support
Assistance with permits, certifications and compliance.
Optimization
Tailored solutions to maximize performance and your investment.
After-sales support
Dedicated service and spare parts available over time.
Get product news and technical updates
Product launches, technical guides and support news from Dison Europe, straight to your inbox.
By subscribing, you agree to receive our newsletter and accept our Privacy Policy. You can unsubscribe at any time.